Operable Movable Acoustic Sliding Folding Partition Walls
Description:
The partition wall is a good consideration of the propagation of
sound waves, greatly improving the soundproofing of the partition.
Partition models 65 type (65mm thick), 85 type (85mm thick), 100
type (100mm thick), ultra-high type, partition reference plane
material gypsum board, fiber board, glass magnesium board, color
steel plate, sound-absorbing board.
A variety of panels, such as melamine panels, are available for
selection. The structure and frame are made of 6063-T6 reinforced
aluminum alloy. The installation height is less than 10,000mm.
The soundproofing performance of the partition is significant.
After laboratory tests, the air sound insulation can reach up to
RW=53dB. The panel material and internal soundproof materials used
in the fire-proof partition are all flame-retardant materials.
Technical information:
| Series | BG65 | BG85 | BG100 |
| Panel suspension | Top hung only | Top hung only | Top hung only |
| Panel thickness | 65 mm | 85 mm | 100 mm |
| Max height | 4000 mm | 6000 mm | 18000 mm |
| Panel width | 500-1200 mm | 500-1200 mm | 500-1200 mm |
| Face material | 9 mm | 9 mm | 12 mm |
| Pass doors | Single door or Double door |
| Sound insulation | 20-32dB Rw | 28-36dB Rw | 32-50dB Rw |
Finish Material | Plywood, MDF, Laminate, Melamine, Gypsum board, Fabric, Leather,
Insulation board, Fireproof board, Wall paper, Vinyl, Painting,
etc. (Customized) |
Application:
The operable wall series is used wherever room space needs to be
fully utilized. Hotels, conference centers, educational
establishments, offices, training areas, etc. can all benefit from
the flexibility of Dividers operable walls.
Feature:
Individual panels that can be stored away for maximum space
utilization.
Operable top and bottom seals for effortless operation.
Isolated aluminium frame construction for enhanced acoustics.
High performance multiple in fill's for maximum sound attenuation.
Unique track and carrier system ensuring quiet and easy operation.
Numerous panel stacking options for complete flexibility.
No floor track ensuring obstruction free threshold.
Three panel sizes to accommodate a wide range of acoustic
requirements .
Parking movable wall:
1. If there is a door in the door, first turn the square hole on
both sides of the door to rotate 180 degrees, loosen the upper and
lower seals through the transmission wheel, and then close the door
in the door;
2, open the last screen of the telescopic aluminum plate and the
upper and lower seals;
3. Retract the telescopic aluminum plate of the last screen so that
its distance can at least turn the distance of the screen,
generally about 140 mm;
4. Push the screen to the position of the screen in the direction
of the track.
5. After each group of screens is collected in the same way, press
each two screens tightly to minimize the distance between the
screens and the screens. If necessary, you can open the up and down
motion seals of the last screen that is housed at the hidden plate
so that it presses against the rails and the ground. This will
prevent others from easily pulling the screen out.
Acoustic performance:
Our top Hung acoustic operable walls were designed specifically
with the office refurbishment sector in mind. With sound attentions
available from 37dB RW to 53 dB RW, there is no acoustic issue
between rooms that the Top Hung Operable Wall cannot cater for.
Sound reduction dB ratings are often quoted from laboratory test
results which are misleading in respect of final performance
values. They are merely useful for initial specification purposes.
Independent on-site tests as carried out by partners are
recommended as in-situ results will differ from laboratory test
certification and are therefore the only true guide to achievable
sound attenuation.
