No Need Floor Track Conference Rooom Sound Proof Sliding Wall
Partition Materials
Description:
The sliding wall partition is a kind of operable wall that can
divide a large space into a small space or a small space into a
large space at any time according to needs and has a general wall
function. It can serve as a multi-purpose room with multiple
functions.
The sliding partition has the characteristics of easy installation,
reliability, industrial production, fire prevention, and
environmental protection.
Technical information:
| Series | BG65 | BG85 | BG100 |
| Panel suspension | Top hung only | Top hung only | Top hung only |
| Panel thickness | 65 mm | 85 mm | 100 mm |
| Max height | 4000 mm | 6000 mm | 18000 mm |
| Panel width | 500-1200 mm | 500-1200 mm | 500-1200 mm |
| Face material | 9 mm | 9 mm | 12 mm |
| Pass doors | Single door or Double door |
| Sound insulation | 20-32dB Rw | 28-36dB Rw | 32-50dB Rw |
Finish Material | Plywood, MDF, Laminate, Melamine, Gypsum board, Fabric, Leather,
Insulation board, Fireproof board, Wall paper, Vinyl, Painting,
etc. (Customized) |
Application:
At present, movable partition and fixed partition series products
are widely used in hotels, hotels, multi-purpose halls, conference
rooms, banquet halls, office buildings, exhibition halls, financial
institutions, government offices, hospitals, factories and other
occasions.
Feature:
1.it is very convenient to be able to expand or reduce it according
to different needs.
2.Preservation and storage are appropriate and convenient.
3.The sound insulation is good, not only the sound insulation, but
also the heat insulation.
4.The usual mobile partition, its design is relatively fashionable.
So, be able to put it anywhere. Can also play a certain
beautification role.
5.The stability of the mobile partition is strong. It is not easy
to offset the position.
Installing details:
1. Remember that the track should be loose enough above all the
brackets to ensure that the track is paused;
2. After the track of the movable partition is laid, tighten the
connection of all the tracks and adjust the horizontal level of the
track correctly. The direction of the track installation must also
be horizontal and straight;
3. When the track facility is installed, the sound insulation and
mineral wool are the necessary plates for installation;
4. Before closing the movable partition, the height of the carrier
must be adjusted, and the straight angle of the track should be
checked to make the track partition work well;
5. Check all active partitions, whether they are all vertical, if
there is no damage, you can enter the edge of the aluminum frame of
the rubber seal vertically and not bend;
If the orbital direction is horizontal, but the active partition is
suspended, then the carrier height must be adjusted.
