4 Meters High Gypsum Board Wall Partition Indoor Acoustic Foldable
Wall
Product Description
1.Track installation:Suspension fixed way is at the top of the
partition board install the hanging wheel, and connected to the
track suspension. The track and hanging wheel should be chosen
according to the partition size and load weight.
2.Partition panel installation: according to the design drawing,
draw on each partition panel to mark the line wheel, fix the wheel
with screws on the partition board top; Then the panel be put into
track, let each panel in the perpendicular to the ground; Test and
push-pull flexible rotation, and finally to fixed connection.
3.Debugging: movable panel need to discretion, sealing and so on
debugging after installed. Then cleaning up the panel, complete the
installation work
| Series | BG65 | BG85 | BG100 |
| Panel suspension | Top hung only |
| Panel thickness | 65mm | 85mm | 100mm |
| Max height | 4000mm | 6000mm | 8000mm |
| Panel width | 600-1230mm |
| Face material | 9mm | 9mm | 12mm |
| Sound insulation | 20-32db RW | 30-38db RW | 35-45db RW |
| Weight | 20-30 kg/sq M | 22-35kg/sq M | 28-40kg/sq M |
| Track system | Single or two point |
| Frame construction | Aluminum frame |
| Finish materials | Plywood, MDF, Laminate, Melamine, Gypsum board, Fabric, Leather,
Insulation board, Fireproof board, Wall paper, Vinyl, Painting,
etc. (Customized) |
Advantages
1. Without ground track: No need ground track, keep floor intact,
Only need top hanger system.
2. Stable and safe: After with upper and lower telescopic pressure
device, make the partition stable and secure and not easy to swing.
3. Sound insulation: the soundproof is good performance, the best
sound insulation rate can reach 55db.
4. Energy-saving insulation: excellent thermal insulation
properties, according to the different attendance rate, the large
is divided into a small space to reduce air conditioning power
consumption.
5. High-effcient fire prevetion: Use highly efficient fireproof
material, good fireproof performance.
6. Elegant appearance: many seletion of surface decoration, can
make a unified indoor decoration.
7. Retractable and flexible: partition panel can easy to control,
only one person can finish the whole process of fix up partition.
8. Easy storage: When not need the partitions, panels can beHidden
in a dedicated srorage cabinet, does not affect the
overallappearance.
9. Wide spread use: Very widely use, suitable to Conference room,
Exhibition hall, Restaurant, High purity plant, Office and similar
facilities.
How do the movable partition wall work?
The continuously hinged panels are pulled from their parked
position to 'close' (or extend) the wall and pushed back to the
parked position to 'open' (or fold)the wall. Final flat alignment
of wall panels is assisted pneumatically by a gas piston located in
the top track. A lever or recess handle is fitted to the lead panel
and this combined with a vertical rebated profile provides the
system with its pass door. The door is available with or without a
lock cylinder.
Our easy lock-up set.
Retractable pressure seals on top and bottom are extended and
retracted by a single 180°turn removable operating handle.
Retractable Pressure Seals.
Once the panel is positioned, they are sealed in place with
retractable pressure seals
Telescopic sleeve panel.
Final closure of the wall is achieved by extending a telescopic
sleeve on the last panel. The sweep strip simultaneously extends
the top and bottom. The rubber sealing strip on the side edge of
telescopic panelcan seal the wall tightly to reach acoustic
integrity.
